ANALISIS METODE HEURISTIK LINE BALANCING UNTUK OPTIMASI KESEIMBANGAN LINTASAN PADA PROSES SEWING PRODUKSI SARUNG TANGAN GOLF

Authors

  • Hidayat Al Ma'ruf Universitas Teknologi Yogyakarta
  • Suseno Suseno Universitas Teknologi Yogyakarta

DOI:

https://doi.org/10.61722/jmia.v3i4.11628

Keywords:

Ranked Positional Weight (RPW), Line Balancing, Largest Candidate Rule (LCR), Region Approach (RA), Production Line Efficiency

Abstract

The golf glove sewing production line at PT XYZ experienced line imbalance, as indicated by differences in workstation cycle times that caused bottlenecks, high idle time, and low line efficiency. This study aimed to improve production line performance by applying three heuristic line balancing methods: Ranked Positional Weight (RPW), Largest Candidate Rule (LCR), and Region Approach (RA). Line performance was evaluated using line efficiency, balance delay, idle time, smoothness index, and the number of workstations. The initial production line consisted of 12 workstations with a line efficiency of 67.63%, a balance delay of 32.37%, a smoothness index of 50.78, and a total idle time of 159.81 seconds.

References

Afifah, D. H. (2023). Penerapan Line Balancing Dengan Metode Heuristik Pada Lini Produksi Sewing 11a Produk Sleeveless Dress G8Er16 (Studi Kasus: PT Starcam Apparel Indonesia Factory A). Industrial Engineering Online Journal, 12(4), 17–24. https://ejournal3.undip.ac.id/index.php/ieoj/article/view/41338

Arief, I., & Amrina, U. (2022). Penyeimbangan Lintasan Produksi dengan Metode Heuristic Ranked Positional Weight dan Large Candidate Rule pada Lini Perakitan Printer. Go-Integratif : Jurnal Teknik Sistem dan Industri, 3(02), 74–86. https://doi.org/10.35261/gijtsi.v3i02.6860

Ariqah, R., & Arvianto, A. (2025). Penyeimbangan Lini Sewing Guna Meningkatkan Efisiensi Lintasan Menggunakan Metode Heuristik (Studi Kasus di PT. Sandang Asia Maju Abadi).

Basuki, A., & Cahyani, A. D. (2022). Metode Line Balancing Heuristik untuk Penyeleseian Masalah Terjadinya Bottleneck pada Lintasan Produksi. Rekayasa, 13(3), 317–323. https://doi.org/10.21107/rekayasa.v13i3.19765

Esa Pratiwi, & Agus Nurrokhman. (2025). Perbaikan keseimbangan lini produksi dengan metode regional approach, largest candidate rule dan ranked positional weight. JENIUS : Jurnal Terapan Teknik Industri, 6(2), 177–188. https://doi.org/10.37373/jenius.v6i2.1698

Idris, A. F. & Hasanuddin, U. (2023). Penerapan Konsep Line Balancing pada Proses Pendekatan Metode Heuristik.

Mumtaz, J., & Alvina Prima Hapsari, C. (2025). Analisis Line Balancing Pada Lini Produksi Sewing C-9 Dengan Menggunakan Metode Heuristik (Studi Kasus: PT Sari Warna Asli Garment).

Novianti, E., & Herwanto, D. (2023). Penerapan Line Balancing Produksi Arm Rear Brake dengan Metode Ranked Positional Weight di PT. Ciptaunggul Karya Abadi. Jurnal Serambi Engineering, 8(2), 5875–5882. https://doi.org/10.32672/jse.v8i2.5977

Downloads

Published

2026-06-30

Issue

Vol. 3 No. 4 (2026): Agustus

Section

Articles

License

Copyright (c) 2026 JURNAL MULTIDISIPLIN ILMU AKADEMIK

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.