PEMETAAN KEBISINGAN LINGKUNGAN MENGGUNAKAN PERANGKAT LUNAK SURFER DI AREA PRODUKSI GEDUNG 3 PERUSAHAAN PABRIK SEPATU KULIT
DOI:
https://doi.org/10.61722/jssr.v2i1.1017Keywords:
Noise, Noise Measurement, Shoe CompanyAbstract
Operational activities of Leather Shoe Manufacturing Company is engaged in the production of shoes, potentially generating noise obtained from the machines in the manufacture of these shoes. Noise that occurs in production area buildings affects the health and comfort of workers. This research aims to determine noise levels, areas of noise exposure and analysis of noise causes. The noise measurement method refers to the noise mapping method and the sound level meter instrument. The data obtained was then processed into a contour map with variations in green, yellow, orange and red using Surfer 16 software. The research results showed that the highest noise was in column G row 25 with a noise value of 94 dB. This noise arises as a result of the production process which uses hammer machines and eyelet machines. Based on the calculation results, noise mapping is carried out using Surfer 16 software in order to find out which areas have the highest risk of noise hazards.
References
Supriyatno, A. (2016). Pemetaan kebisingan pada kawasan pendidikan akibat transportasi di area zoss (Zona Selamat Sekolah) Di Kota Pontianak. Jurnal Teknologi Lingkungan Lahan Basah, 5(1)
Darlani, D., & Sugiharto, S. (2017). Kebisingan Dan Gangguan Psikologis Pekerja Weaving Loom Dan Inspection Pt. Primatexco Indonesia. JHE (Journal of Health Education), 2(2), 130-137
Keputusan Menteri Ketenagakerjaan Republik Indonesia no 05 tahun 2018. Suma'ur, P. 1995. Keselamatan Kerjadan Pencegahan Kecelakaan. Jakarta: Gunung
Agung
Savitri, M. A., & Syafei, A. D. (2018). Pe Maulana, R. R., Soelistijorini, R., & Santoso, T. B. (2011). Pemetaan Kebisingan Di Lingkungan Kampus Politeknik (PENS-ITS). Repo. pens. ac. id. metaan Tingkat Kebisingan di Rumah Sakit Islam A. Yani Surabaya. Jurnal Teknik ITS, 7(1), F192-F195.
Silviana, N. A., Siregar, N., Banjarnahor, M., & Munte, S. (2021). Pengukuran dan Pemetaan Tingkat Kebisingan pada Area Produksi. Journal of Industrial and Manufacture Engineering.
Afrizal, R., & Anggraini, F. J. (2022). Intensitas Bising dan Pemetaan Kebisingan dengan Surfer 13 di Lingkungan Kerja PT Hok Tong Jambi. Rekayasa Hijau: Jurnal Teknologi Ramah Lingkungan, 6(3), 197-207.
Aini, A. N., Anwar, I. F., Sufanir, A. M. S., & Astor, Y. (2018). Survei dan pemetaan zona kebisingan arus lalu lintas pada kawasan RSUP DR Hasan Sadikin Bandung. Potensi: Jurnal Sipil Politeknik, 20(1).
Indriyanti, L. H., Wangi, P. K., & Simanjuntak, K. (2019). Hubungan paparan kebisingan terhadap peningkatan tekanan darah pada pekerja. Jurnal Kedokteran dan Kesehatan, 15(1), 36-45.
Rosyidiin, A. F., & Murnawan, H. (2023). Analisis dan Evaluasi Intensitas Kebisingan Menggunakan Software Golden Surfer 23 Pada Perusahaan Fabrikasi Baja. Jurnal Heuristic
Downloads
Published
Issue
Section
License
Copyright (c) 2024 JOURNAL SAINS STUDENT RESEARCH
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
