Analisis Performance Test Aero Turbine Rolls-Royce M250-C20B

Authors

  • Aldo Akbar Putra Universitas Pertahanan RI
  • Kritian Felix F. Purba Universitas Pertahanan RI
  • Mario Delon Simanjuntak Universitas Pertahanan RI
  • Aditia Aulia Universitas Pertahanan RI

DOI:

https://doi.org/10.61722/jssr.v3i2.4341

Keywords:

Overhaul, Performance Test, Rolls-Royce M250-C20B, Turboshaft

Abstract

This article analyzes the performance of the Rolls-Royce M250-C20B turboshaft engine through a performance test conducted after a comprehensive overhaul at PT. Nusantara Turbine and Propulsion. The test was carried out to evaluate key parameters, including rotor speed (N1 and N2), exhaust gas temperature (T5), shaft horsepower (SHP), vibration levels, and specific fuel consumption (SFC). The results indicate that the engine meets operational feasibility standards with high efficiency and stable vibration performance, although some parameters were slightly below optimal thresholds. In conclusion, the engine is considered airworthy and suitable for continued operation with satisfactory and economical performance, in line with aviation industry standards.

References

Rolls-Royce. 1996. Operation and Maintenance Manual 250-C20 Series Sixth Edition. Rolls-Royce Corporation

M. Faizal, Bambang T, Eriq S. 2017. ANALISIS PERFORMANCE TM2500 GAS TURBINE GENERATOR PACKAGE PLTG X PADA FACTORY TEST DAN SITE TEST. BINA TEKNIKA, Volume 13 Nomor 2.

Abdul S, Daryadi, Sunarto, Adhy P. 2017. PENGUJIAN VIBRASI PADA TEST CELL TURBOFAN ENGINE TYPE CFM 56-7B. Jurnal Rekayasa Mesin. Politeknik Negeri Semarang.

Sutanto, H., & Purnomo, M. (2018). Analisis performa boiler pada pabrik kelapa sawit. NOZEL Jurnal Pendidikan Teknik Mesin, 7(1), 25-35.

Hasibuan, F., & Pratama, R. (2021). Desain dan Optimasi Engine Turboshaft untuk Aplikasi Helikopter. Jurnal Teknik Penerbangan Indonesia, 14(3), 234-245.

Arianto, R. (2020). Manajemen pemeliharaan pesawat terbang untuk keselamatan penerbangan. Jurnal Teknologi Penerbangan Indonesia, 14(1), 35-44

Susilo, H., & Dwijono, D. (2021). Analisis siklus hidup pesawat dan pengaruhnya terhadap efisiensi operasional. Jurnal Ilmu Penerbangan, 19(2), 112-120.

Wibowo, A. (2019). Pemeliharaan engine pesawat terbang untuk keselamatan penerbangan. Jurnal Teknologi Penerbangan, 15(1), 23-30.

Prasetyo, E., & Setiawan, D. (2021). Uji performa dan fungsional engine pesawat: Metodologi dan hasil. Jurnal Ilmu Penerbangan, 20(2), 97-105.

Ahsan, S., Lemma, Tamiru A. (2024). Investigation of operational settings, environmental conditions, and faults on the gas turbine performance. IOP Publishing Ltd

Matthaiou, I., Khandelwal, B. (2017). Vibration Monitoring of Gas Turbine Engines: Machine-Learning Approaches and Their Challenges. Front. Built Environ. 3:54

Downloads

Published

2025-04-22